STANDARD
FEATURES
All units are
factory packaged with operating controls, relief valves, burner
and fuel train. Installation is made simple in that only service
connections are needed to place in operation. Flexible burner systems
are available for firing natural gas, LP gas, No.2 oil, heavy oil,
or combinations. High density 2” mineral wool insulation assures
lower radiant heat loss. In addition to meeting the requirements
of U.L., burner systems are optionally available to meet the requirements
of FM, IRI, MILITARY and others.
STEAM
TRIM
Steam pressure gauge with syphon and test-cock; combination low water cut-off
and pump control (or feeder); auxiliary low water cut-off with manual reset;
water column gauge glass set and drain valve; ASME safety relief valve(s); operating
and high limit pressure control.
WATER
TRIM
Combination pressure and temperature gauge; low water cut-off control with manual
reset; ASME relief valve(s); operating and high limit temperature controls.
|
Capacities
From 7.4 to 650 HP 248 to 21,759 MBTU/HR. 15 PSI Steam 30 PSI Water (60 PSI
Water Optional)
