 BLOWDOWN
WASTE MANAGEMENT
The HBC Blowdown Separator
is designed to take water from the boiler during blowdown and reduce it to
atmospheric pressure for disposal. The HBC Separator accomplishes this by separating
the subsequent flashed steam from the hot water. As the blowdown enters the
vessel, it is forced into a centrifugal pattern by means of a striking plate.
The steam is vented to the atmosphere through a top connection. The HBC Separator
is built as per requirements Section VIII of the ASME Code and stamped by the
National Board of Pressure Vessel Inspectors. The HBC Blowdown Separator provides
an economical means of safe boiler blowdown.
The separator includes a
structural steel support stand for mounting to foundation. Options available
are after cooler, manual cooling valve assembly, automatic cooling valve assembly,
and exhaust heads.
HURST BLOWDOWN SEPARATORS are
built to Section VIII, Division 1 of the ASME Code for 250 PSI design pressure.
(200 PSI design pressure with 150# ANSI flanges) Blowdown separator design
pressure should be a minimum of 25% of the boiler maximum allowable working
pressure (MAWP) as recommended by the National Board.
 |
Designed, constructed
and stamped in accordance with the requirements of the ASME Boiler Codes. |
|
