LPE Series

Modified Three-Pass Scotch Marine Fire Tube Boiler

Modified three pass scotch marine fire tube boiler. Designed for minimal clearances where installation and floor space are the challenge. Durable features start with the thickest vessel shell in its class, along with large furnace volume for ultimate combustion efficiency.

imageCapacities From 20 to 100 HP 670 to 3,348 MBTU/HR. 15 PSI Steam 30 PSI Water (60 PSI Water Optional)

  • Factory Assembled, Prewired and Tested
  • No Field Assembly Required
  • UL Listed Boiler/Burner Packages
  • Fully Assembled, Prepiped, Prewired, Pressure Tested Gas Trains
  • Complies With ASME, UL, CSD-1 and ASHRAE Standards
  • High Efficiency, Low Stack Temperatures
  • Customer Service Support Through National Network of Sales, Service, Start-up, Training and Parts By Factory Representatives
  • Modified Scotch designed to fit through a standard 36" x 80" door opening... up to 100HP (3,348 mbh output).

LPE Boiler Features

The Hurst LPE "Performance" boiler is America's most heavily designed and built boiler in its class. Consider the features and specify the Hurst LPE.

1. A welded steel firetube boiler, the LPE has extra heavy 12 gauge tubes for extended life. All tubes are attached to the tube sheets by rolling and flaring. There are no welded tubes in the LPE.

2. Thickest materials used in the industry...

  • Boiler shell is 5/16" thick boiler plate.
  • Twin boiler tube sheets are 1/2" thick boiler plate.
  • Insulation is 2" mineral wool and is lagged with 22 gauge boiler jacket.
  • Extra heavy 3" channel iron boiler skids.

3. Designed to last with special industrial grade features...

  • Couplings are 3,000 psi.
  • Flanged, detachable front and rear smoke boxes.
  • Brass nuts on front access panels, brass plugs in factory prepiped crosses and tees on trim.

Standard Features

Boiler
Three pass design for 15 psi steam or 30 psi water (optionally available for 60 psi water). Factory assembled with trim, tested, ASME code, UL, and CSD-1 standards.

Steam Trim
Kunkle safety relief valve, operating pressure control, high limit pressure control with manual reset, 4 1/2" steam pressure gauge with syphon and test cock, combination pump control and low water cut off with gauge glass assembly and drain valve, auxiliary low water cut-off with manual reset.

Water Boiler Trim
Kunkle safety relief valve, operating temperature control, high limit temperature control with manual reset, 3 1/2" combination pressure & temperature gauge, low water cut-off control with manual reset.

Burner
UL listed with prepiped, wired and factory tested forced draft power burners for natural gas, propane (LP) gas, No. 2 (diesel) oil, or combination gas/oil.

EXPAND LPE Series