Hurst Boiler FAQ
Guide to Biomass: Biomass Fuel Overview
Biomass fuels are organic materials produced in a renewable manner. Two categories of biomass fuels, woody fuels and animal wastes, comprise the vast majority of available biomass fuels. Municipal solid waste (MSW) is also a source of biomass fuel. Biomass fuels have low energy densities compared to fossil fuels. In other words, a significantly larger volume of biomass fuel is required to generate the same energy as a smaller volume of fossil fuel.
The low energy density means that the costs of fuel collection and transportation can quickly outweigh the value of the fuel. Biomass fuels are typically consumed on-site or transported short distances only (e.g., less than 50 miles). Biomass fuels tend to have a high moisture content, which adds weight and increases the cost of transportation. The moisture content also decreases combustion performance.
There are two primary factors to be considered in the evaluation of biomass fuels: Fuel supply, including the total quantities available, the stability of the supply or of the industry generating the fuel, and competitive uses or markets for the fuel. Cost of biomass fuel collection, processing, and transportation, and who pays these costs.
This section discusses three sources of biomass fuel: woody fuels, animal waste, and MSW. These discussions include the issues of fuel supply and costs. These fuels are summarized, along with their respective benefits and barriers, in Table 2 at the end of this section.
Woody Fuels
Wood wastes of all types make excellent biomass fuels and can be used in a wide variety of biomass technologies. Combustion of woody fuels to generate steam or electricity is a proven technology and is the most common biomass-to-energy process. Different types of woody fuels can typically be mixed together as a common fuel, although differing moisture content and chemical makeup can affect the overall conversion rate or efficiency of a biomass project. There are at least six subgroups of woody fuels. The differentiators between these subgroups mainly have to do with availability and cost. Forestry residues—in-forest woody debris and slash from logging and forest management activities. Mill residues—byproducts such as sawdust, hog fuel, and wood chips from lumber mills, plywood manufacturing, and other wood processing facilities. Agricultural residues—byproducts of agricultural activities including crop wastes, vineyard and orchard prunings or turnings, and rejected agricultural products. Urban wood and yard wastes—residential organics collected by municipal programs or recycling centers and construction wood wastes. Dedicated biomass crops—trees, corn, oilseed rape, and other crops grown as dedicated feedstocks for a biomass project. Chemical recovery fuels (black liquor)—woody residues recovered out of the chemicals used to separate fiber for the pulp and paper industry.
Forestry Residues
Forestry residues have been the focus of many recent biomass studies and feasibility assessments due to increasing forest management and wildfire prevention activities under the National Fire Plan. The USDA Forest Service and the Bureau of Land Management have been tasked with reducing the hazardous fuel loading within the forests and the urban-wildland interface.
Forestry residues are typically disposed of by on-site (in-forest) stacking and burning. This results in substantial air emissions that affect not only the forest lands and nearby populations, but the overall regional air quality as well. Open burning can also cause water quality and erosion concerns. The Forest Service and other public and private land management entities would like to have viable alternatives for disposing of their forestry residues in a more environmentally benign manner. An ideal situation, from the perspective of forest managers, would be the creation of a market for the forestry residues. The market they envision would generate revenues for the forest managers, which in turn would allow much needed expansion of the forest management programs.
Mill Residues
Mill residues are a much more economically attractive fuel than forestry residues, since the in-forest collection and chipping are already included as part of the commercial mill operations. Biomass facilities collocated with and integral to the mill operation have the advantage of eliminating transportation altogether and thus truly achieve a no-cost fuel. Mill residues have long been used to generate steam and electricity.
In Washington State alone, there are approximately 38 facilities that combust about 3 million BDT of mill residues per year to generate steam and electricity. All but two of these mill-residue-fired biomass projects are owned and operated by the mills or wood products companies that supply their fuel. The in-plant facilities primarily generate steam for lumber drying and processing. Any electricity produced is used to offset plant use, although a few facilities do sell excess electrical power to the local utility.
One example of a mill residue biomass-to-energy facility not owned by a mill is Avista Utility’s Kettle Falls Station in northeastern Washington. The facility is strategically located within an average distance of 46 miles from 15 different mills, and purchases approximately 350,000 BDT per year of residues to generate 46 MW of electrical power. The facility was conceived in the late 1970s when mills were facing stricter pollution regulations that required them to replace their wigwam burners. Rather than invest in new equipment, the mills were willing to enter into long-term contracts with the private electric utility to supply a biomass facility with mill residues. The facility continues to operate successfully, due in large part to its unique location in one of the most heavily forested areas in the Pacific Northwest.
Agricultural Residues
Agricultural residues can provide a substantial amount of biomass fuel. Similar to the way mill residues provide a significant portion of the overall biomass consumption in the Pacific Northwest, agricultural residues from sugar cane harvesting and processing provide a significant portion of the total biomass consumption in other parts of the world. One significant issue with agricultural residues is the seasonal variation of the supply.
Large residue volumes follow harvests, but residues throughout the rest of the year are minimal. Biomass facilities that depend significantly on agricultural residues must either be able to adjust output to follow the seasonal variation, or have the capacity to stockpile a significant amount of fuel.
Urban Wood and Yard Wastes
Urban wood and yard wastes are similar in nature to agricultural residues in many regards. A biomass facility will rarely need to purchase urban wood and yard wastes, and most likely can charge a tipping fee to accept the fuel. Many landfills are already sorting waste material by isolating wood waste. This waste could be diverted to a biomass project, and although the volume currently accepted at the landfills would not be enough on its own to fuel a biomass project, it could be an important supplemental fuel and could provide more value to the community in which the landfill resides through a biomass project than it currently does as daily landfill cover.
Dedicated Biomass Crops
Dedicated biomass crops are grown specifically to fuel a biomass project. The most prevalent example of dedicated biomass crops are corn varieties grown for ethanol production. Fast-growing poplar trees have also been farm-raised for a biomass fuel, but this has not proven to be economically sustainable. Another dedicated crop example is soybean oils used in the production of biodiesel.
Chemical Recovery Fuels
Chemical recovery fuels are responsible for over 60 percent of the total biomass energy consumption of the United States, and therefore must be mentioned in any analysis of biomass. By and large, the chemical recovery facilities are owned by pulp and paper facilities and are an integral part of the facility operation.
Animal Wastes
Animal wastes include manures, renderings, and other wastes from livestock finishing operations. Although animal wastes contain energy, the primary motivation for biomass processing of animal wastes is mitigation of a disposal issue rather than generation of energy. This is especially true for animal manures. Animal manures are typically disposed of through land application to farmlands. Tightening regulations on nutrient management, surface and groundwater contamination, and odor control are beginning to force new manure management and disposal practices. Biomass technologies present attractive options for mitigating many of the environmental challenges of manure wastes. The most common biomass technologies for animal manures are combustion, anaerobic digestion, and composting. Moisture content of the manure and the amount of contaminants, such as bedding, determine which technology is most appropriate.
The dairy industry in particular is well suited to biomass-to-energy opportunities because of the large volume of manure that a milking cow produces, and because dairy operations have automated and frequent manure collection processes. Yakima County is the largest producer of dairy products of any county in the State, and the dairy populations within the County include approximately 75,000 to 85,000 active milking cows on about 80 separate dairies.
Dry Animal Manure
Dry animal manure is produced by feedlots and livestock corrals, where the manure is collected and removed only once or twice a year. Manure that is scraped or flushed on a more frequent schedule can also be separated, stacked, and allowed to dry. Dry manure is typically defined as having a moisture content less than 30 percent. Dry manure can be composted or can fuel a biomass-to-energy combustion project.
Animal manure does have value to farmers as fertilizer, and a biomass-to-energy project would need to compete for the manure. However, the total volume of manure produced in many livestock operations exceeds the amount of fertilizer required for the farmlands, and Nutrient Management Plans are beginning to limit the over-fertilization of farmlands. Therefore, although there are competitive uses for the manure and low-cost disposal options at this time, manure disposal is going to become more costly over time, and the demand for alternative disposal options, including biomass-to-energy, will only increase.
Wet Animal Manure (Dairy Manure Slurry)
Wet animal manure is typically associated with larger and more modern dairy operations that house their milking cows in free-stall barns and use a flush system for manure collection. The combination of free-stall barns and manure flushing collects all of the milking cow manure with every milking cycle, two or three times a day. The manure is significantly diluted through the addition of the flush water, but after separation of some of the flush water, the slurry is an excellent fuel.
The average full-size, 1,400-pound milking cow produces about 112 pounds, or 13.5 gallons, of raw manure every day with a 12.5 percent solids concentration as excreted. Dilution with flush water to a 6 percent solids concentration for anaerobic digestion results in an average 28 gallons per milking cow per day. This is a significant volume of manure slurry, over 51 million gallons per year for a 5,000-head dairy.
Other Animal Wastes
Renderings, fats, and other wastes from animal finishing can also be used in a biomass-to-energy project. These wastes typically have value for refeeding or other applications. One potentially valuable use of these wastes is in the production of biodiesel. Biodiesel is typically manufactured by blending methanol (produced by anaerobic digestion or other technologies) with vegetable or corn oils. However, animal renderings can replace the oils.
Municipal Solid Waste
Municipal solid waste (MSW) in not technically a biomass fuel, but because of its alternative nature and “waste” status, MSW is often included in biomass discussions and statistics. The organic portion of the MSW is a biomass fuel, but it is impossible to completely sort and filter MSW to obtain only organics. MSW can be converted to energy in three different ways: Mass burn MSW combustion, Processing of MSW into refuse-derived fuel (RDF), and combustion of the RDF Landfilling of MSW and collection and combustion of the landfill gas (LFG).
MSW- and RDF-fueled waste-to-energy facilities may not qualify for the same tax treatment or subsidies as true biomass-to-energy facilities. Waste-to-energy facilities that burn MSW or RDF typically have higher levels of emissions and ash compared with other pure biomass fuel combustion facilities, and permitting and public acceptance of these facilities can be more difficult.
RDF is created from MSW by sorting and processing to eliminate as much noncombustible material as possible, and thus RDF has a higher energy value than MSW and will produce less ash. To create RDF, the MSW is shredded, separated by density to remove heavy noncombustibles, magnetically filtered to remove small ferrous metals, screened to redirect oversized materials back for re-shredding, and screened to remove undersized materials. The RDF may be compacted for transportation. It takes about 1.27 tons of MSW to create 1 ton of RDF.
LFG is produced by decomposing MSW. The landfill actually serves as the biomass conversion facility. LFG contains between 30 and 55 percent methane, which is then flared or converted to electricity. Although conversion of LFG to electricity is gaining popularity because the source of the gas is free and flaring the gas is wasted energy, conversion of MSW to LFG has one of the lowest conversion efficiencies and one of the slowest conversion rates of all biomass technologies.
In approximate numbers, 1 ton of MSW in a landfill will take 20 years of LFG recovery to produce just 40 percent of the energy that the same ton of MSW will produce in a matter of minutes through RDF combustion. One reason for the difference in the energy recovery is that some non-organic portions of the MSW, such as plastics, will release substantial amounts of energy when combusted as RDF, but will not break down into LFG. One advantage of MSW as a fuel is that many landfills already have control over this waste stream.
Also, MSW can command high tipping fees. For MSW waste-to- energy projects, the revenues generated by the tipping fees will normally exceed the revenues from production of electricity or steam. Tipping fees for MSW waste-to- energy can run as high as $100 or $200 per ton, or higher. Another benefit of using MSW is that this type of project would redirect waste bound for the landfill, and would thus extend the useful life of the landfill.
Source: Review of Biomass Fuels and Technologies
What are Greenhouse Gas (GHG) Offsets?
A greenhouse gas (GHG) offset, sometimes referred to as a carbon offset, is a tradable commodity representing a unit of GHG emissions reduction or avoidance. Typically, a GHG offset represents a reduction or avoidance of one metric ton of carbon dioxide equivalent (CO2e). GHG offsets may be purchased by consumers and businesses to "offset" their own emissions, such as those associated with electricity consumption, product manufacturing processes, automobile use, and air travel. GHG offsets can be derived from a variety of project types that reduce or avoid GHG emissions, with diverse methods for measuring these reductions. Examples of GHG reduction projects include renewable electricity generation, energy efficiency measures, methane capture at landfill sites, soil carbon sequestration, and reforestation projects. Developers of these project types can sell GHG offsets to consumers or businesses to help finance their projects.
What is Forest Management?
Forest management can lead to cleaner air, safer communities and lower firefighting costs, yet its greatest value may lie in addressing carbon neutrality and what it keeps hidden underground.
Managing forests helps reduce greenhouse gas emissions. It lowers the threat and severity of wildfire, a significant source of avoidable emissions. It also keeps fossil fuels underground.
Research has shown that active forest management can provide significantly greater carbon benefits than management strategies that set forests aside in reserves. While young reserved and managed forests sequester, or remove from the atmosphere and store, roughly the same amount of carbon in standing trees, actively managed forests can provide the additional benefit of offsetting fossil-fuel use by producing low-carbon energy from forest and sawmill residues.
Managing forests to reduce fuel loads provides immediate dividends. Fewer fuels means less-intense wildfire, greater firefighter safety, lesser environmental consequence and fewer greenhouse gas emissions. There's great carbon benefit right there – emissions avoided and standing carbon protected – by capturing the thinnings that might otherwise have gone up in smoke and using them to generate energy can be an added plus.
When forests are thinned, the harvested biomass or branches, brush and small trees can be chipped and used to produce energy. Biomass energy takes carbon that is above ground – wood chips – and keeps it above ground by burning it in power plants to produce electricity. Biomass energy is carbon neutral because no more carbon is released producing energy than would be if the vegetation were to simply decay.
Burning fossil fuels, conversely, takes carbon that was stored safely underground and releases it to the atmosphere. Burning fossil fuels increases carbon emissions every time.
Forest management can reduce emissions from wildfire and burning fossil fuels because every megawatt generated from biomass can replace a megawatt generated from emission-spewing fossil fuels. Substituting biomass energy, a byproduct of sustainable forest management, for coal-fired energy could reduce carbon footprints worldwide.
What are Biofuels?
Liquid fuels derived from plant, animal, or other organic matter (biomass).
Why is Renewable Energy from Biomass Considered Carbon Neutral?
Large carbon reductions are possible when using a biomass system because wood is considered to be a carbon neutral fuel. This means the amount of carbon dioxide emitted is offset by the amount of carbon dioxide which is sequestered.
Trees grow in the forest and then we burn them as firewood and we release the carbon into the atmosphere. As other trees grow, and when they go through photosynthesis they take all that carbon back in, they produce wood, and that carbon is stored in the wood.
Because of this constant cycle of carbon emission and reuse, the carbon levels produced by burning wood contribute minimally to CO2 emissions.
What are Renewable Biomass and Gasification Technologies?
Renewable Biomass and Gasification Technologies
Gasification
Gasification is a process that converts carbonaceous materials such as biomass into carbon monoxide and hydrogen by reacting the raw material at high temperatures with a controlled amount of oxygen and/or steam. The resulting gas mixture is called synthesis gas or “syngas.”
CHP
Combined heat and power (CHP), also known as cogeneration, is an efficient, clean, and reliable approach to generating power and thermal energy from biomass. By installing a CHP system designed to meet the thermal and electrical base loads of a facility, CHP can greatly increase the facility's operational efficiency and decrease energy costs. At the same time, CHP reduces the emission of greenhouse gases, which contribute to global climate change.
Anaerobic Digestion
Anaerobic digestion is a series of processes in which microorganisms break down biodegradable material in the absence of oxygen. It is widely used to treat wastewater sludges and organic wastes because, in addition to producing biogas, it provides volume and mass reduction of the input material.
Pyrolysis
Pyrolysis is a thermal decomposition process that occurs at moderate temperatures with a high heat transfer rate to the biomass particles and a short hot vapor residence time in the reaction zone. Fast pyrolysis of biomass produces a liquid product, pyrolysis oil or bio-oil that can be readily stored and transported.
Advanced Biofuels
Advanced biofuels are renewable fuels derived from renewable biomass that achieve a 50 percent greenhouse gas emissions reduction over conventional biofuels. The definition of advanced biofuels include cellulosic biofuels, biomass-based diesel, biobutanol, green gasoline and other proven and potential renewable transportation fuels.
What are the advantages of using wood biomass?
Wood fuel has several environmental advantages compared with fossil fuels. Wood can be continually replenished, which leads to a sustainable and dependable supply. However, proper forest management must be practiced to ensure that growing conditions are not degraded during biomass production.
There is little net production of carbon dioxide from wood combustion, because the CO2 generated during combustion of wood equals the CO2 consumed during the lifecycle of the tree. Transporting the material using petroleum generates excess CO2.
Wood fuel contains minimal heavy metals and extremely low levels of sulfur; wood fuel is no threat to acid rain pollution. Particulate emissions from wood are controllable through standard emission control devices such as bag houses, cyclone separators, and electronic precipitators. Bottom ash is minimal. Usually, wood ash is less than 1% of the weight of the wood, and sometimes ash may be used as a fertilizer.
The principal economic advantage of wood-burning systems is that wood fuel is usually less expensive than competing fossil fuels. However, the price of wood for use as fuel can be extremely variable. Sometimes when surplus supplies of wood residues are available at nearby forest product manufacturing plants or municipal solid waste handling facilities, the cost can be very low or even negative. Transportation for delivering from the supply site to the wood combustion or wood processing unit is the primary expense of wood fuel.
CHP/CHCP
CHP/CHCP systems when combined with absorption chillers provide an efficient way of recovering "waste" heat to cooling energy, this type of energy production known as “cogeneration” and "trigeneration" or combined heat, cooling and power production (CHCP).
Why Biomass?
Fossil fuel costs are at an all time high, without any relief in sight, making renewable energy the fuel source of the future. Imagine being in control of your energy costs and not having to rely on a fuel source that is seemingly out of control and uncertain.
What is Biomass?
Biomass is any organic material which can be produced on a renewable basis and may be used as a feedstock for energy. Wood biomass often comes from low grade wood and logging residues, timber stand improvements, rehabilitation of understock sites, or short rotation of woody crops. Grasses, crops such as corn and grains, and industrial, food and urban waste can also be used as a source of biomass. Along with being renewable and locally available, biomass creates fewer emissions than fossil fuels and is, on average, about one-third the cost of fossil fuels.
Who will install and maintain my Hurst Boiler system?
Your system will be installed by a Hurst trained plumbing and heating contractor from your region. That contractor will also service and maintain your system.
Need more help? Call us at Toll Free 877-99HURST
