 Sizes
30 to 1,000 gallons (Larger Sizes on Request) For all types of steam boilers
with pressures to 300 psig.
SUGGESTED
SPECIFICATIONS
The Hurst Feedmiser Automatic
Return System provides storage for water make-up and return condensate from
the system loop. The system consists of an elevated tank mounted boilers.
When equipped with optional
trim, the Feedmiser provides a quality, heavy duty packaged unit fully assembled
and ready to install. These units are factory assembled with pre-wired control
panel, and fully piped pumps along with all the neccessary fittings and valves.
Consider the optional automatic steam preheater. When incorporated into the
system, feedwater temperature can be maintained at 210° F. At this high
temperature, oxygen and carbon dioxide are released, reducing corrosion problems
in the boiler and piping system. Systems are available in single, dual, triple
and quad pump configurations and custom orders are welcome.
The
following trim shall be factory installed on each system:
- Automatic, internal
float actuated fresh water make-up valve assembly.
- Water gauge glass set
with bronze shut-off cocks and drain.
- Tank drain valve, brass
gate.
- Bi-metallic water thermometer.
- Pump suction piping
with shut-off valve and strainer.
Typical
Optional Equipment:
- Control panel
with motor starters & breakers.
- Pump function
lights, selector switches.
- Diffuser
tube for extra high temperature condensate return .
- High and
low water level alarms.
- Pump alternator
switches.
- Magnesium
corrosion rod.
- Epoxy lining
Manhole openings (200 gallon & larger).
- Electric
solenoid valve make-up water assembly. Steam operated feedwater
preheater.
- Discharge
pressure gauges.
|
